|Product name||Pigeon breast feel baby bottle heat-resistant glass 240 ml light green|
|For more product information||"Pigeon breast milk feeling baby bottles heat-resistant glass 240 ml light green" is, in mother and I breasts of so is adopted and crush-proof nipples type bottles (glass). Soft and well stretched, and I breasts can drink and tongue movement. The soft bulge because the baby opens his mouth wide and mammal movement smoothly. MOM, for Dad in a wide-mouth milk preparation and easier and easier to wash. Heat-resistant glass, easy to keep clean and dirt can easily fall off. Light green. Nipples size: SS (round holes). Since the newborn 0 months.|
|Material||Hood and Cap: polypropylene
Nipples: synthetic rubber (silicone)
Jar: borosilicate glasses
|How to use the||-Cleaning: always try, to clean and hygienic.
-Before using it for the first time is always cleaning and disinfection!.
And pigeon feeding bottle vegetable washing, wash on lukewarm water immediately after every use.
-Use a nylon brush to wash glass bottles.
And vent valves and vent holes, sucking hole with both hands gently scrubbed please. Strongly wash and pull to avoid valve, causing the leak.
-To protect vent valve safe white powdered food additives apply there. Please use it after first wash.
-Nipple tip is very delicate. While holding the tip of the nipples with fingers developemental stages wash when washing and cleaning brush.
-Note: mammal that cause scratches when cleaning Abrasives containing wool, metal scouring pads or cleansers, such as when to wash the bottles do not use. Cracking may result.
● disinfect: use must be disinfected.
• Put nipples big pan into plenty of water, washed well, bottles, caps, hoods, fire raises the boiling point. Sterilization time is 3-5 minutes after boiling.
And may be transformed and put lots of hot water, not boiling on the edge of the pan.
-Excessive boiling the product quickly Saute.
-Baby "pigeon milk PON", such as the disinfection use only disinfectants bottles and nipples. For more information, follow the instructions of the disinfectant.
Disinfection, the printing color is thinning.
See microwave sterilization.
And must be specially designed for use. Mammals cannot sterilize bottles and parts intact into the microwave oven.
-Follow disinfection method for handling equipment.
-Please use according to the instruction manual for your microwave.
* If you use in the hospitals, kinds of microorganisms, and unspecified number of baby environments, such as adequate, should determine the time.
-How to assemble
* Check the vent valve is open before assembling.
1. milk and crush the head boards, has.
2. from the top of the CAP plug long nipples seat on one side.
3. with your thumbs into inside the CAP across the seat.
4. This is completed.
* Make sure seat is not distorted or, upside down.
5. pivot in the bottle nipple and Cap.
* Removal of the CAP, to tighten properly.
-Milk preparation: powdered milk show see more harmonic method.
1. use hot water milk preparation, make sure boiling point once the cool 70 degrees or more.
* Do not use absolutely hot water from boiling water at least 30 minutes, became less than 70 degrees.
* Baby, such as the winter we recommend the milk water of about 70 degrees when bottles are getting cold, so that the hot water for the cycle the milk water above 70 degrees.
Baby * Please note may be split into sharply immediately after the boiling hot water bottles are getting cold, and.
2. milk to follow breast to name baby formula manufacturers.
3. set the bottle caps attached to the nipples and tighten lightly.
Without a set of food burned, such as no clean towels and pot baby hook with baby bottles have the content mix perfectly bottle slowly rotates in the horizontal direction. Milk powder has melted completely, pour remaining water until the single amount.
* Erupted inside this assent and the risk of Burns is dangerous.
Set the food and shake, due to high-temperature hot baby bottle pressure rising leakage and spewing of fear is dangerous.
4. install the hood style milk after the baby cooled the temperature bias to lean against vessels such as the cooking Bowl is for water, or having a bottle in place, tap water, suitable for feeding.
* Baby nipples / caps without water at this time, as the focus on the water below the cap of the bottle.
* In addition, cool in ice water and baby bottles inside and could crack the glass bottles, caused the sharp temperature difference between the outside so please avoid.
5. check temperature suitable for feeding, hanging a small amount of milk on the inside of the arm.
It is okay to feel warm, not hot. If you feel hot, let it cool before feeding little.
-When the nipple is a nipple sucking hole
Tilt the bottle because the smoke hole is closed, not dripping milk. After a cool enough, baby please make sure in the surface temperature of the bottle.
* Please check from the water after cold surface of the bottle, so rang to the temperature of the milk bottle.
-(Shape of the nipple sucking hole hole only) and to incline the bottle style milk after the milk will pop out. To breastfeed for a while as the milk is to fall and water dripping from.
Using microwave baby bottles for milk of making hot water or milk preparation do not warm the milk.
Milk preparation by the children, is dangerous, so please avoid.
-Keep feeding from cool to body temperature.
And, feeding baby sure Dacko. In addition, breastfeeding are parents.
And may too tighten the CAP and squashed nipples during breastfeeding.
-Please give a as soon as possible after applying milk. Discard milk did not use within 2 hours.
And also changed to the new nipple baby adapt to one nipple and I hate lead can be. When long nipples 2 or more alternating for about two months in torn or not be change as soon as possible.
-Please note there baby teeth in biting nipples, pulling and tearing.
|Please note||-Drop glass bottles, crack and join the impact, such as bumping.
-Make sure each time you use the cracks or scratches, especially not a missing screw.
-May take seriously hurt in a sharp cross flying splinters when broken.
-Off the bump, crack and shock. Please note the handling 10 minutes.
-Please use the hot water milk preparation, make sure boiling point once the cool 70 degrees or more. Baby, winter crack into sharply immediately after the boiling hot water because bottles are getting cold and may cause burns.
-May cause crack when cooled in ice water, to quench.
-Cool slowly in water must be flowing water or cooking Bowl.
-Every time you use the crack and scratches (especially the screw part and small scratches and chipped) not sure. May have scratches and chipped and broken, off hand, so please you changed with new ones.
-Children are never alone sure don't. Cracked when you bruise too is dangerous.
-Toning milk when baby bottles will be hot. Please note that to Burns.
-Stop is milk preparation by the children. You may be burned.
-Keep feeding to make sure the temperature of the milk and drink from. You may be burned.
-Disinfection after boiling and microwave disinfection after a baby bottle gets warm. Please note that to Burns.
-Baby style milk at the spout inside and shake the bottle vertically, fear of Burns is dangerous. Also, set food and shake the baby due to high-temperature hot water bottle pressure is dangerous may increase leaks and injection.
-Baby bottle is for giving baby feeding and other beverages. Do not use it for other purposes.
-Baby bottle scale dimmer for breasts. If you need more accurate use measuring cups and measuring spoons.
|Category||Baby & kids|